TCG Opal安全子系统类（SSC）2.0在ATP的M.2 NVMe SSD上受支持，它是一套用于自加密驱动器的规范，这些规范提供了一种层次结构的安全管理标准，以保护数据免遭盗窃和篡改。 安全功能包括基于硬件的数据加密，预启动身份验证（PBA）和AES-128 / 256数据加密，以保护静态数据的机密性。

专门为SSD和存储卡设计的消毒解决方案，确保在需要处置或重新使用SSD或存储卡时，不会恢复或检索敏感数据。通过确保不保留任何敏感数据，Secure Erase是具有严格安全要求的政府，国家和商业应用程序的理想解决方案。

Hardware Secure Erase wipes out all user data, overwrites all locations, and prevents the retrieval or recovery of erased data. This feature is activated using the general-purpose input/output (GPIO) connector to trigger a Fast Erase or Fast Erase + Purge (overwrite) for all flash physical blocks containing user data, such as user data, spare, wear leveling, and bad blocks, as well as all flash blocks containing metadata. Overwriting makes data unrecoverable by replacing all data (user data as well as areas that are not accessible to the user) with patterns or non-sensitive data

Hardware Write Protect safeguards stored data by preventing modifications and deletions. This feature is enabled by putting a jumper on specific pins on the printed circuit board (PCB). Depending on the NAND flash product, the SSD will either deny write commands from the host or render the SSD in “Read Only” mode to thwart write access and data tampering