Highest-Endurance Industrial SSD

ATP Unveils Industry’s Highest-Endurance Industrial SSD with 125°C Operating Temperature Range

2024-08-21

   

ATP Electronics, a global leader in specialized storage and memory solutions, proudly announces the launch of the N751Pi PCIe Gen4 NVMe M.2 2280 SSDs, which set a new industry standard with unmatched endurance among industrial solid state drives (SSDs) configured with pseudo single-level cell (pSLC) NAND.

The groundbreaking 150K P/E cycling configuration of NAND was achieved, thanks to a combination of ATP’s exceptional strengths — from the use of prime NAND package, stringent NAND integrated circuits (IC) characterization and 100% NAND screening and validation capabilities, to ATP’s own-developed firmware, specialized hardware configurations, and technologies.

Thanks to their exceptional endurance and ability to operate in extreme temperatures, the N751Pi SSDs are ideal for mission-critical and write-intensive applications in harsh environments, rugged conditions, and intense workloads.

Highest-Endurance Industrial SSD in the Market

 

Unmatched Endurance

The N751Pi SSD comes with a standard high endurance rating of 100K P/E cycles but can be further configured upon request to achieve an unparalleled endurance of 150K P/E cycles — a 50% increase. This enhancement translates to an impressive 75 Drive Writes Per Day (DWPD) for sequential write workloads and 21 DWPD for JESD219A enterprise workloads, all supported by a robust 5-year warranty.

                                                                                                       

Notes:

1. The same WAI is applied to both P/E cycle scenarios.

2. The calculations are based on a specific drive configuration (1.28 TB usable capacity).

3. The drive has 7% overprovisioning, with the physical drive being 1.36 TB.

Superior Data Retention

With 100% P/E cycles, the N751Pi SSD can store data for up to a year at 55°C, outperforming other storage devices with similar P/E cycles. This superior data retention capability makes the N751Pi SSD an ideal choice for applications requiring long-term data preservation under challenging environmental conditions.

 

Thermally Engineered for Robust 125°C Cross-Temperature Operating Range

From IC selection/screening to firmware optimization and hardware configuration, our SSDs are thermally engineered at every level:  

 
Industrial-Grade Prime Die:

Rigorous NAND IC screening ensures top-quality components for extreme conditions

Advanced Firmware Configuration

Thermal Throttling:

The SSD intelligently adjusts its workload to maintain maximum sustained performance and throughput while preventing overheating. This dynamic approach optimizes performance within safe temperature ranges.

Cross-Temperature Error Handling:

ATP has developed technology to mitigate errors that can occur when SSDs operate across varying temperatures. This is particularly important for scenarios where data is written at low temperatures (-40°C) but read at high temperatures (85°C), which can increase error rates and potentially compromise data integrity over time. ATP's solution helps maintain data integrity even as the NAND approaches the end of its operational life.

                                                                                                        

Customizable Heatsinks

For better performance in harsh environments, ATP offers customizable heatsink options based on customer requests or joint validation results. Available options include 4 mm, 8 mm, and copper foil heatsinks.
 

Hardware-Based Power Loss Protection with MCU and PLP Circuitry

 

ATP adoption of microcontroller units (MCUs) in SSDs enhance reliability, performance, and adaptability by enabling advanced power management, data integrity protection, and real-time optimization of drive operations.

                         

MCU in action: Input Power Noise De-glitch mechanism that accurately distinguishes between actual power loss events and temporary power instabilities. This prevents false triggers that could cause unnecessary cache flushes or SSD freezes due to misinterpreted power fluctuations.

 
Enhanced TLC Configuration Offering: N651Si/N651Sc

 

The N651Si/N651Sc Series provides an excellent middle ground for applications that require better-than-average TLC performance and endurance, but do not necessarily need the extreme endurance of pSLC.

This version outperforms other TLC offerings on the market and includes all the advanced features of the N751Pi Series, with capacities ranging from 240 GB to 3.84 TB.

Product Specifications

 

PCIe® Gen4 NVMe M.2 2280 SSD
Product Line
Premium Superior Value
N751Pi
(150K P/E cycle configuration drive
available on a project basis)
N751Pi N651Si / N651Sc N601Sc N601Vi / N601Vc
Interface PCIe G4 x4
Flash Type 3D TLC (pSLC mode) 3D TLC (pSLC mode) 3D TLC 3D TLC 3D TLC
Form Factor M.2 2280-D6-M1 M.2 2280-D2-M M.2 2280-D6-M1 M.2 2280-D2-M M.2 2280-D6-M1 M.2 2280-D2-M M.2 2280-D2-M M.2 2280-S3-M
Operating Temperature -40°C to 85°C -40°C to 85°C / 0°C to 70°C 0°C to 70°C -40°C to 85°C / 0°C to 70°C
Power Loss Protection Options Hardware + Firmware Based Firmware Based Hardware + Firmware Based Firmware Based Hardware + Firmware Based Firmware Based Firmware Based Firmware Based
Optional SED Features AES 256-bit Encryption, TCG Opal 2.0
Capacity 80 GB to ˊˋ640 GB 1.28 TB 80 GB to ˊˋ640 GB 1.28 TB 240 GB to 1.92 TB 240 GB to 3.84 TB 240 GB to 1.92 TB 240 GB to 1.92 TB
Performance
Sequential Read (MB/s) up to 6,450 6,450 6,450 6,450 6,450 6,450 6,450 5,000
Sequential Write (MB/s) up to 6,050 6,100 6,050 6,100 6,050 6,050 6,050 4,300
Random Reads IOPS up to 1,090,000 1,050,000 1,090,000 1,050,000 1,091,000 1,091,000 1,095,000 800,000
Random Writes IOPS up to 1,107,000 1,200,000 1,107,000 1,200,000 1,245,000 1,245,000 1,244,000 1,100,000
Endurance and Reliability
Endurance (TBW)2 up to 90,000 TB 180,000 TB 60,000 TB 120,000 TB 9,230 TB 17,930 TB 5,700 TB 4,175 TB
Reliability
MTBF @ 25°C
>2,000,000 hours
Others
Dimensions (mm) 80.0 x 22.0 x 3.85
80.0 x 24.4 x 12.5 (with 8 mm heatsink)
80.0 x 22.0 x 2.4
Certifications CE, FCC, BSMI, UKCA, RoHS, REACH CE, FCC, BSMI, UKCA, RoHS, REACH, UL
Warranty 5 years 2 years


1. M.2 2280-D6-M form factor (max height: 3.85mm), offers Hardware Based Power Loss Protection. M.2 2280-D2-M form factor (max height: 3.6mm), provides Firmware Based Power Loss Protection.
2. Under highest Sequential write value. May vary by density, configuration and applications.



 

 

For more information on the ATP N751Pi PCIe® Gen4 NVMe M.2 2280 SSD, visit: https://www.atpinc.com/products/industrial-gen4-nvme-M.2-ssd

Media Contact on the Press Release: Kelly Lin (Kellylin[at]tw.atpinc.com)

Follow ATP Electronics on LinkedIn: https://www.linkedin.com/company/atp-electronics

 

==========

About ATP

ATP Electronics (“ATP”) has dedicated over 30 years of manufacturing excellence as the premier provider of memory and NAND flash storage products for rigorous embedded/industrial/automotive applications. As the “Global Leader in Specialized Storage and Memory Solutions,” ATP is known for its expertise in thermal and high-endurance solutions. ATP is committed to delivering add-on value, differentiation and the best TCO for customers. A true manufacturer, ATP manages every stage of the manufacturing process to ensure quality and product longevity. ATP upholds the highest standards of corporate social responsibility by ensuring sustainable value for workers, the environment, and business throughout the global supply chain. For more information on ATP Electronics, please visit www.atpinc.com or contact us at info[at]atpinc.com.

Back to News Release
Marketing & PR Inquiry
Contact Us