The ATP eUSB module employs the widely supported USB interface, making it a suitable boot device and efficient data storage solution. Ideal for industrial and rugged environments, the eUSB module is cost-effective and offers data transfer efficiency in a wide range of applications such as networking, embedded and medical applications that previously used the Intel® Z-U130 Value SSD. Featuring PowerProtector technology with built-in hardware-based power backup circuit, ATP eUSB delivers reliable controller and lasting NAND flash operation even during sudden power-loss events.
|Density||1 GB to 32 GB||8 GB to 32 GB||16GB to 64GB|
|Performance Sequential Read up to (MB/s)||30||25||44|
|Performance Sequential Write up to (MB/s)||25||19||17|
|Interface||Compatible with USB 2.0 (480 Mbps)||Compatible with USB 2.0 (480 Mbps)||Compatible with USB 2.0 (480 Mbps)|
|Operating Temperature||-40°C to 85°C||0°C to 70°C||0°C to 70°C|
|Endurance TBW* (max.)||1,280 TB||38.4 TB||>76.8 TB**|
|Endurance DWPD* (max.)||37.4||1.7||>1.7**|
|Reliability MTBF @ 25°C||>5,000,000 hours||>2,000,000 hours||>2,000,000 hours|
|Reliability Number of Insertions||10,000 minimum||10,000 minimum||10,000 minimum|
|Dimensions: L x W x H (mm)||36.9 x 26.6 x 9.5||36.9 x 26.6 x 9.5||36.9 x 26.6 x 9.5|
|Connector Pin Pitch||2.54 mm||2.54 mm||2.54 mm / 2.00 mm|
* Under highest Sequential write value. May vary by density, configuration and applications.
** Estimated endurance only; product is under development.
|Technologies & Add-On Services||Product Line|
Advanced Wear Leveling
Dynamic Data Refresh